Snmp-Server View - Dell PowerConnect 8024 Cli Reference Manual

Example
The following example configures an SNMPv3 user "John" in group "user-group".
console(config)# snmp-server user John user-group

snmp-server view

Use the snmp-server view command in Global Configuration mode to create or update a Simple
Network Management Protocol (SNMP) server view entry. To delete a specified SNMP server
view entry, use the no form of this command.
Syntax
view-name oid-tree
snmp-server view
view-name
no snmp-server view
view-name — Specifies the label for the view record that is being created or updated. The
•
name is used to reference the record. (Range: 1-30 characters.)
oid-tree — Specifies the object identifier of the ASN.1 subtree to be included or excluded
•
from the view. To identify the subtree, specify a text string consisting of numbers, such as
1.3.6.2.4, or a word, such as system. Replace a single subidentifier with the asterisk (*)
wildcard to specify a subtree family; for example 1.3.*.4.
• included — Indicates that the view type is included.
• excluded — Indicates that the view type is excluded.
Default Configuration
A view entry does not exist.
Command Mode
Global Configuration mode
User Guidelines
This command can be entered multiple times for the same view record.
Examples
The following example creates a view that includes all objects in the MIB-II system group except
for sysServices (System 7) and all objects for interface 1 in the MIB-II interface group.
console(config)# snmp-server view user-view system included
console(config)# snmp-server view user-view system.7 excluded
console(config)# snmp-server view user-view ifEntry.*.1 included
{ included | excluded }
oid-tree
[ ]
1039
SNMP Commands