Dell PowerConnect 8024 Cli Reference Manual page 106

Command
snmp-server engineID local
snmp-server filter
snmp-server group
snmp-server host
snmp-server location
snmp-server enable traps
authentication
snmp-server v3-host
snmp-server user
snmp-server view
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
SSH
Command
crypto key generate dsa
crypto key generate rsa
crypto key pubkey-chain ssh
ip ssh port
ip ssh pubkey-auth
ip ssh server
key-string
show crypto key mypubkey
show crypto key pubkey-chain ssh Displays SSH public keys stored on the switch.
show ip ssh
user-key
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
106
Command Groups
Description
Specifies the Simple Network Management Protocol
(SNMP) engine ID on the local switch.
Creates or updates an SNMP server filter entry.
Configures a new SNMP group or a table that maps SNMP
users to SNMP views.
Specifies the recipient of SNMP notifications.
the system location string.
Sets
Enables the switch to send SNMP traps when
authentication failed.
Specifies the recipient of SNMPv3 notifications.
onfigures a new SNMP Version 3 user.
C
Creates or updates a Simple Network Management Protocol
(SNMP) server view entry.
Description
Generates DSA key pairs for the switch.
Generates RSA key pairs for the switch.
Enters SSH Public Key-chain configuration mode.
Specifies the port to be used by the SSH server.
Enables public key authentication for incoming SSH
sessions.
Enables the switch to be configured from a SSH server
connection.
Manually specifies a SSH public key.
Displays its own SSH public keys stored on the switch.
Displays the SSH server configuration.
Specifies which SSH public key is manually configured and
enters the SSH public key-string configuration command.
Mode*
GC
GC
GC
GC
GC
GC
GC
GC
GC
Mode*
GC
GC
GC
GC
GC
GC
SK
PE
PE
PE
SP