show ip mcast boundary
Use the show ip mcast boundary command in Privileged EXEC mode to display all the
configured administrative scoped multicast boundaries.
Syntax
show ip mcast boundary {vlan
vlan-id — Valid VLAN ID.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays all the configured administrative scoped multicast boundaries.
console#show ip mcast boundary all
MULTICAST BOUNDARY
Interface
--------
show ip mcast interface
Use the show ip mcast interface command in Privileged EXEC mode to display the multicast
information for the specified interface.
Syntax
show ip mcast interface {vlan
vlan-id — Valid Ethernet port
•
Default Configuration
This command has no default configuration.
718
Multicast Commands
vlan-id
Group
Ip Mask
------
---------------
vlan-id
| all}
| all}