Sflow Polling (Interface Mode) - Dell PowerConnect 8024 Cli Reference Manual

no sflow rcvr-index polling ethernet
rcvr-index — The sFlow Receiver associated with the poller (Range: 1–8).
•
interfaces — The list of interfaces to poll.
•
poll-interval — The sFlow instance polling interval. A poll interval of 0 disables counter
•
sampling. A value of
0–86400).
Default Configuration
There are no pollers configured by default.
The default poll interval is 0.
Command Mode
Global Configuration mode.
User Guidelines
This command has no user guidelines.
Example
console(config)#sflow 1 polling ethernet 1/g1-1/g10 200

sflow polling (Interface Mode)

Use the sflow polling command in Interface Mode to enable a new sflow poller instance for this
data source if rcvr_idx is valid. Use the "no" form of this command to reset poller parameters to
the defaults.
Syntax
rcvr-index
sflow polling
no sflow polling
rcvr-index — The sFlow Receiver associated with the poller (Range: 1 - 8).
•
poll-interval — The sFlow instance polling interval. A poll interval of 0 disables counter
•
sampling. A value of n means once in n seconds a counter sample is generated. (Range: 0 -
86400).
Default Configuration
There are no pollers configured by default.
The default poll interval is 0.
interfaces
n means once in n seconds a counter sample is generated. (Range:
poll-interval
1011
Sflow Commands