Ipv6 Mld Snooping Querier Election Participate - Dell PowerConnect 8024 Cli Reference Manual

Cli reference guide
Hide thumbs Also See for PowerConnect 8024:
Table of Contents

Advertisement

Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 mld snooping querier address Fe80::5

ipv6 mld snooping querier election participate

Use the ipv6 mld snooping querier election participate command to enable the Snooping
Querier to participate in the Querier Election process when it discovers the presence of another
Querier in the VLAN. When this mode is enabled, if the Snooping Querier finds that the other
Querier's source address is higher than the Snooping Querier's address, it stops sending periodic
queries. If the Snooping Querier wins the election then it will continue sending periodic
queries. Use the "no" form of this command to disable election participation on a VLAN.
Syntax
vlan-id
ipv6 mld snooping querier election participate
vlan-id
no ipv6 mld snooping querier election participate
vlan-id — A valid VLAN ID. (Range: 1 - 4093)
Default Configuration
Election participation is disabled by default.
Command Mode
VLAN Database mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-vlan)#ipv6 mld snooping querier election
participate 10
319
IPv6 MLD Snooping Querier Commands

Advertisement

Table of Contents
loading

Table of Contents