Show Stack-Standby - Dell PowerConnect 8024 Cli Reference Manual

RJBR : Received Jabber Errors
RUND : Received Underrun Errors
ROVR : Received Overrun Errors
TFCS : Transmit Frame Check Sequence Errors
TERR : Transmit Errors
1 - xg1:
RBYT:148174422 RPKT:528389 TBYT:679827058 TPKT:2977561
RFCS:0 RFRG:0 RJBR:0 RUND:0 ROVR:0
TFCS:0 TERR:0
1 - xg2:
RBYT:0 RPKT:0 TBYT:419413311 TPKT:620443
RFCS:0 RFRG:0 RJBR:0 RUND:0 ROVR:0
TFCS:0 TERR:0
The following table describes the fields in the example.
Field
Interface
Diagnostic Entry 1
Diagnostic Entry 2
Diagnostic Entry 3

show stack-standby

Use the show stack-standby command to show the Standby configured in the stack. The show
stack-standby command shows the configured or automatically selected standby unit number.
Syntax
show stack-standby
1086
System Management Commands
Description
Port
80 character string used for diagnostics
80 character string used for diagnostics
80 character string used for diagnostics