no revision
value — Configuration revision number. (Range: 0-65535)
•
Default Configuration
Revision number is 0.
Command Mode
MST mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the configuration revision to 1.
console(config)#spanning-tree mst configuration
console(config-mst)#revision 1
show spanning-tree
Use the show spanning-tree command in Privileged EXEC mode to display the spanning-tree
configuration.
Syntax
show spanning-tree [ethernet
instance-id
[instance
]
show spanning-tree [detail] [active | blockedports] | [instance
show spanning-tree mst-configuration
•
detail — Displays detailed information.
•
active — Displays active ports only.
•
blockedports — Displays blocked ports only.
•
mst-configuration — Displays the MST configuration identifier.
interface-number — A valid Ethernet port number.
•
port-channel-number — A valid port-channel index.
•
instance -id — ID of the spanning -tree instance.
•
Default Configuration
This command has no default configuration.
interface-number
| port-channel
port-channel-number
instance-id
]
Spanning Tree Commands
]
457