Dns-Server - Dell PowerConnect 8024 Cli Reference Manual

Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Examples
The following examples clears DHCPv6 statistics for VLAN 11.
console#clear ipv6 dhcp interface vlan 11 statistics

dns-server

Use the dns-server command in IPv6 DHCP Pool Configuration mode to set the ipv6 DNS
server address which is provided to a DHCPv6 client by the DHCPv6 server. DNS server address
is configured for stateless server support.
Syntax
dns-server
no dns-server
dns-server-address — Valid IPv6 address.
•
Default Configuration
This command has no default configuration.
Command Mode
IPv6 DHCP Pool Configuration mode
User Guidelines
DHCPv6 pool can have multiple number of domain names with maximum of 8.
Example
The following example sets the ipv6 DNS server address of 2020:1::1, which is provided to a
DHCPv6 client by the DHCPv6 server.
console(config)#ipv6 dhcp pool addrpool
console(config-dhcp6s-pool)#dns-server 2020:1::1
566
DHCPv6 Commands
dns-server-address
dns-server-address