Nortel Meridian Meridian 1 Scripting Manual page 320

Voice processing commands
<number>
<voice_seg>
maximum length of a voice segment is 2 minutes (120 seconds) for
Meridian Mail and CallPilot.
The GIVE CONTROLLED BROADCAST ANNOUNCEMENT command
must always contain the PLAY PROMPT command (with voice segments and
numbers). The other parameters are optional.
<access_ivrdn> parameter
You can specify the ACCESS IVR DN in which the call is placed. If no IVR DN
is specified, the default, which is configured using Contact Center Manager
Administration, is used.
WITH PRIORITY option
You can specify the priority with which the call is queued. You can assign a
priority of 1 to 4, with 1 being the highest priority and 4 being the lowest. A call
is assigned a priority of 4 by default.
PLAY PROMPT option
For the PLAY PROMPT option parameters, specify a list of voice segments
identified by voice segment variables, a list of numbers, or numbers interspersed
with voice segments.
CONTINUOUS option
By default, broadcast announcements always start from the beginning (that is, in
Start/stop mode). As an option, announcements can be given in continuous
mode, meaning the announcement is played continuously. Calls are connected to
voice ports as they enter the contact center; therefore, depending on the arrival
time, the calls may or may not start at the beginning of the announcement. Every
call hears one complete play of the announcement.
320
The number that you want broadcast.
The voice segment that you want played to the call. The
Standard 8.04
Contact Center Manager