Users must take full responsibility for their applications of any products specified in this document. The information in this document is proprietary to Nortel Networks. Nortel, Nortel (Logo), the Globemark, SL-1, Meridian 1, and Succession are trademarks of Nortel Networks.
Review the Application Gateway Release Notes and keep them handy during deployment. • Review the Application Gateway Hardware Installation Guide. • Use of the Nortel Application Gateway software is subject to the NORTEL NETWORKS SOFTWARE LICENSE and the License terms found in the Application Gateway documentation. Application Gateway Quick Start Guide...
After you log in to the KRS, you will need the following information to produce your keycode license: The MAC address of the server you want to license (i.e. 00:00:00:00:00:00). • The Purchase Order # or Nortel Order # (used to locate your order, which lists the software • licensing items ordered). Procedure While logged in to the KRS, generate your keycode license as follows.
Application Gateway via an Ethernet crossover cable, as described in the Application Gateway Hardware Installation Guide. For the Application Gateway 1000 only, upgrade to 1 GByte of memory, install the server in a rack (if rack-mounted), and change the boot sequence as described in the Application Gateway Hardware Installation Guide.
Page 6
On the computer, start a terminal emulation application, such as HyperTerminal. When you create a connection using HyperTerminal, you will be prompted for Port Settings. Set the serial connection to 9600 bits per second, 8 data bits, no parity, and 1 stop bit;...
Configure the Application Gateway This section describes the minimum configuration required to establish and test a connection between your Application Gateway and another device such as a router or web server. The Pre-Installation Checklist should include the information mentioned throughout this section. Procedure To configure the Application Gateway: In the Application Gateway serial console, enter the default login root and the default...
Page 8
From a web browser, enter: https://AG_ipAddress:9001 ipAddress is the IP address and 9001 is the administration port. If a Security Alert dialog box appears, click Yes. Click the Network tab. Log in as root, and enter the root password (defaults to rootadmin). On the Network >...
Configure Applications The following table summarizes the configuration requirements for the Nortel Voice Office applications. Configuration Steps General (complete these first, in the order listed) Complete the pre-requisite tasks. Customize the Voice Office menu. Set the Voice Office interface language.
Page 10
Zone Paging As needed, create custom zones. If you configured clustering, verify setup for paging. Visual Voicemail Enable Nortel Messaging features such as Desktop and Web Messaging. Configure Visual Voicemail. Smart Agent Review the general deployment steps. Configure the connection from the Application Gateway to the Smart Agent client and LDAP server.
Page 11
Application Gateway through its Administration Tool (Administration > Downloads page). The downloads page includes links to the Keycode Retrieval System (KRS) site and the user guides for supported IP phones. For online support, go to www.nortel.com/support. Application Gateway Quick Start Guide...
Page 14
Users must take full responsibility for their applications of any products specified in this document. The information in this document is proprietary to Nortel Networks. Nortel, Nortel (Logo), the Globemark, SL-1, Meridian 1, and Succession are trademarks of Nortel Networks.