Reset Zone Statistics - HP 5920 Series Command Reference Manual

Default
The Pairwise feature is disabled for a zone.
Views
Zone view
Predefined user roles
network-admin
Usage guidelines
The Pairwise feature can be configured only in enhanced zoning mode.
The Pairwise feature runs on a per-zone basis. A member can have different roles in different zones.
When the Pairwise feature is disabled for a zone, member roles do not take effect in that zone.
The following roles are defined for zone members:
• Initiator—Typically a server.
Target—Typically a storage device.
•
When a member acts as an initiator, it can access target members. When a member acts as a target, it
can access initiator members. When a member acts as both an initiator and a target, it can access both
target members and initiator members.
For the Pairwise feature to take effect, you must reactivate the active zone set after enabling the Pairwise
feature.
The Pairwise feature status is distributed to the entire fabric when you configure the zoneset activate or
zoneset distribute command.
Examples
# Enable the Pairwise feature for zone z1.
<Sysname>system-view
[Sysname]vsan 2
[Sysname-vsan2]zone name z1
[Sysname-vsan2-zone-z1]pairwise-zoning enable
Related commands
member (zone view)
•
member (zone-alias view)
•
zoneset activate
•
zoneset distribute
•

reset zone statistics

Use reset zone statistics to clear zone packet statistics.
Syntax
reset zone statistics [ vsan vsan-id ]
Views
User view
112