A.9
Instruction Map
2
Each F
MC-16LX instruction code consists of 1 or 2 bytes. Therefore, the instruction
map consists of multiple pages.
2
The F
MC-16LX instruction map is given below.
I Structure of Instruction Map
Bit operation
instructions
An instruction such as the NOP instruction that ends in one byte is completed within the basic page. An
instruction such as the MOVS instruction that requires two bytes recognizes the existence of byte 2 map.
When it references byte 1, and can check byte 1 by referencing.
Figure A.9-2 shows correspondence between actual instruction code and instruction map-
Figure A.9-1 Structure of Instruction Map
Basic page map
Character string
2-byte instructions
operation instructions
APPENDIX A Instructions
: Byte 1
: Byte 2
ea instructions x 9
655