Mapping - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide
Table 5: CLI Equivalents of Terms Used in Documentation for ACX500 Outdoor
Routers (continued)
Hardware
Item (as
Displayed Description (as
in the CLI) Displayed in the CLI)
Xcvr (n) Abbreviated name of
the transceiver
Power Built-in power supply
supply (n)
Fan Fan
NOTE: ACX500 routers
are fanless.
ACX500 Outdoor Routers with PoE Hardware and CLI Terminology Mapping
28
Value (as
Displayed in the
CLI)
n is a value
equivalent to the
number of the port
in which the
transceiver is
installed.
Value of n is always
0.
–
Figure 4: ACX500 Outdoor Router Interface Port Mapping
1— GPS LED
2— FPC 0, PIC 0: 0/0/0 – 0/0/2
Table 6 on page 29 describes the hardware terms used in ACX500 outdoor router with
PoE documentation and the corresponding terms used in the Junos OS CLI.
Figure 5 on page 30 shows the port locations of the interfaces.
Item in Documentation
Optical transceivers
DC power supply
Fan
3— FPC 0, PIC 1:
(3x1GE SFP)
Copyright © 2017, Juniper Networks, Inc.
Additional Information
Uplink Ports on ACX500
Routers
ACX500 Power Overview
Cooling System and Airflow in
ACX500 Routers
0/1/0 – 0/1/2 (3x1GE RJ-45)