Acx1100 Routers Hardware And Cli Terminology Mapping - Juniper ACX1000 Configuration Manual

Table 7: CLI Equivalents of Terms Used in Documentation for ACX1000 Router (continued)
Hardware
Item (as
displayed Description (as
in the CLI) displayed in the CLI)
PIC (n) Abbreviated name of
the Physical Interface
Card (PIC)
8x T1/E1 (RJ-48)
8x 1GE (RJ-45)
One of the following:
4x 1GE (RJ-45)
4x 1GE (SFP)
Xcvr (n) Abbreviated name of
the transceiver
Power Built-in power supply
supply (n)
Fan Fan

ACX1100 Routers Hardware and CLI Terminology Mapping

Copyright © 2017, Juniper Networks, Inc.
Value (as
displayed in the
CLI)
n is a value in the
range of 0–2.
PIC 0
PIC 1
PIC 2
n is a value
equivalent to the
number of the port
in which the
transceiver is
installed.
Value of n is
always 0.
–
Figure 6: ACX1000 Interface Port Mapping
ACX1000
MGMT
ALARM
CONSOLE/AUX
SYS 0
Table 8 on page 32 describes the hardware terms used in ACX1100 router documentation
and the corresponding terms used in the Junos OS command line interface (CLI).
Figure 7 on page 33 shows the port locations of the interfaces.
Chapter 1: ACX Series Universal Access Router Overview
Item in Documentation
The router does not have
actual PIC devices; see
entries for PIC 0 through PIC
2 for the equivalent item on
the router.
Built-in network ports on the
front panel of the router
Built-in uplink ports on the
front panel of the router
Built-in uplink ports on the
front panel of the router
Optical transceivers
DC power supply
Fan
FPC 0, PIC 0
T1/E1 0/0/0-0/0/7
T1/E1 GE
0/0/4 0/0/5 0/0/6 0/0/7 0/1/4 0/1/5 0/1/6
1PPS 10MHz
IN OUT IN OUT
0/0/0 0/0/1 0/0/2 0/0/3 0/1/0 0/1/1 0/1/2
FPC 0, PIC 1
GE 0/1/0-0/1/7
Additional Information
Interface Naming Conventions
Used in the Junos OS Operational
Commands
ACX1000 and ACX1100 Universal
Access Router Overview
ACX1000 and ACX1100 Universal
Access Router Overview
ACX1000 and ACX1100 Universal
Access Router Overview
Uplink Ports on ACX1000 and
ACX1100 Routers
ACX1000 and ACX1100 Power
Overview
Cooling System and Airflow in an
ACX1000 and ACX1100 Router
FPC 0, PIC 2
GE 0/2/0-0/2/3
GE COMBO
0/1/7 0/2/2 (Cu) 0/2/3 (Cu)
GE COMBO
0/1/3 0/2/0 (Cu) 0/2/1 (Cu)
0/2/0 (SFP) 0/2/1 (SFP) 0/2/2 (SFP) 0/2/3 (SFP)
FPC 0, PIC 2
GE 0/2/0-0/2/3
31