Juniper ACX1000 Configuration Manual page 121

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
A warning message appears as
unattended-boot enable is successfully committed. commit complete
Exit from configuration mode:
7.
[edit]
user@host# exit
user@host>
For information on taking system snapshot, see
an ACX Series Router" on page 64
Configuration" on page 65.
To disable unattended boot mode, delete the bootloader password and then delete the
unattended boot mode:
Use the following command to delete the bootloader password:
1.
[edit]
user@host# delete system boot-loader-authentication
Use the following command to delete unattended boot mode:
2.
[edit]
user@host# delete system unattended-boot
Commit the changes:
3.
[edit]
user@host# commit
A warning message appears as
unattended-boot enable is successfully committed. commit complete
For information on taking system snapshot, see
on an ACX Series Router" on page 64
and Configuration" on page
Exit from configuration mode:
4.
[edit]
user@host# exit
root@>
If unattended mode is enabled or configured, the USB mode of booting is disabled. If you
want to boot from an external USB device, you need use the
at the bootloader prompt.
Understanding System Snapshot on an ACX Series Router on page 64
Example: Taking a Snapshot of the Software and Configuration on page 65
Chapter 2: Installing and Upgrading Junos OS
Please take snapshot to alternate slice after
"Understanding System Snapshot on
and "Example: Taking a Snapshot of the Software and
Please take snapshot to alternate slice after
"Understanding System Snapshot
and "Example: Taking a Snapshot of the Software
65.
bootfrom USB CLI command
63