Juniper ACX1000 Configuration Manual page 90

ACX Series Universal Access Router Configuration Guide
Table 8: CLI Equivalents of Terms Used in Documentation for ACX1100 Routers
Hardware
Item (as
displayed Description (as
in the CLI) displayed in the CLI)
Chassis ACX1100
FPC (n) Abbreviated name of the
Flexible PIC Concentrator
(FPC)
PIC (n) Abbreviated name of the
Physical Interface Card
(PIC)
8x 1GE (RJ-45)
One of the following:
4x 1GE (RJ-45)
4x 1GE (SFP)
Xcvr (n) Abbreviated name of the
transceiver
Power Built-in power supply
supply (n)
Fan Fan
NOTE: ACX1100 routers
are fanless models.
32
Value (as
displayed in the
CLI) Item in Documentation
– Router chassis
Value of n is always The router does not have
0. actual FPCs. In this case,
FPC refers to the router
itself.
n is a value in the The router does not have
range of 0–1. actual PIC devices; see
entries for PIC 0 through
PIC 2 for the equivalent
item on the router.
PIC 0 Built-in uplink ports on the
front panel of the router
PIC 1 Built-in uplink ports on the
front panel of the router
n is a value Optical transceivers
equivalent to the
number of the port
in which the
transceiver is
installed.
Value of n is always AC or DC power supply
0.
– Fan
Additional Information
Chassis Physical Specifications
for ACX1000 and ACX1100
Routers
Interface Naming Conventions
Used in the Junos OS
Operational Commands
Interface Naming Conventions
Used in the Junos OS
Operational Commands
ACX1000 and ACX1100
Universal Access Router
Overview
ACX1000 and ACX1100
Universal Access Router
Overview
Uplink Ports on ACX1000 and
ACX1100 Routers
ACX1000 and ACX1100 Power
Overview
Cooling System and Airflow in
an ACX1000 and ACX1100
Router
Copyright © 2017, Juniper Networks, Inc.