Checklist For Monitoring T1 Interfaces - Juniper ACX1000 Configuration Manual

Action
Table 23: Checklist for Monitoring Fast Ethernet and Gigabit Ethernet
Interfaces
Tasks
Monitor Fast Ethernet and Gigabit Ethernet Interfaces
1. Display the Status of Fast Ethernet Interfaces
2. Display the Status of a Specific Fast Ethernet or Gigabit
Ethernet Interface
3. Display Extensive Status Information for a Specific Fast
Ethernet or Gigabit Ethernet Interface
4. Monitor Statistics for a Fast Ethernet or Gigabit Ethernet
Interface
5. Fiber-Optic Ethernet Interface Specifications
Meaning
Related
Documentation

Checklist for Monitoring T1 Interfaces

Purpose
Action
Table 24: Checklist for Monitoring T1 Interfaces
Tasks
Monitor T1 Interfaces
1. Display the Status of T1 Interfaces
2. Display the Status of a Specific T1 Interface
3. Display Extensive Status Information for a Specific T1
Interface
4. Monitor Statistics for a T1 Interface
Copyright © 2017, Juniper Networks, Inc.
Table 23 on page 151 provides links and commands for monitoring Fast Ethernet and
Gigabit Ethernet interfaces.
You can use the above described commands to monitor and to display the configurations
for Fast Ethernet and Gigabit Ethernet interfaces.
Display the Status of Gigabit Ethernet Interfaces
Display the Status of Fast Ethernet Interfaces
To monitor T1 interfaces and begin the process of isolating T1 interface problems when
they occur.
Table 24 on page 151 provides the links and commands for monitoring T1 interfaces.
Chapter 4: Configuring Interfaces and Chassis
Command or Action
show interfaces terse (fe* | ge*)
show interfaces (fe-fpc/pic/port | ge-fpc/pic/port)
show interfaces (fe-fpc/pic/port | ge-fpc/pic/port) extensive
monitor interface (fe-fpc/pic/port | ge-fpc/pic/port)
Command or Action
show interfaces terse t1*
show interfaces t1-fpc/pic/port
show interfaces t1-fpc/pic/port extensive
monitor interface t1-fpc/pic/port
151