Channelized Oc3/Stm1 (Multi-Rate) Circuit Emulation Mic With Sfp; Overview; 16-Port Channelized E1/T1 Circuit Emulation Mic Overview - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide
Channelized OC3/STM1 (Multi-Rate) Circuit Emulation MIC with SFP Overview
Table 18: Platform Support for Channelized OC3/STM1 (Multi-Rate) Circuit Emulation MIC with
SFP
Interface Name
Channelized OC3/STM1
(Multi-Rate) Circuit
Emulation MIC with SFP
Related
Documentation

16-Port Channelized E1/T1 Circuit Emulation MIC Overview

106
The Channelized OC3/STM1 (Multi-Rate) Circuit Emulation MIC with SFP is a channelized
circuit emulation MIC with rate-selectability. Its port speed can be specified as
COC3-CSTM1 or COC12-CSTM4. The default port speed is COC3-CSTM1.
Model Number
MIC-3D-4COC3-1COC12-CE
ACX-MIC-4COC3-1COC12CE
The following features are supported on this MIC:
Per-MIC SONET/SDH framing
Internal and loop clocking
Structure-Agnostic TDM over Packet (SAToP)
Pseudowire Emulation Edge to Edge (PWE3) control word for use over an MPLS
packet-switched network (PSN)
Asynchronous Transfer Mode (ATM) inverse multiplexing for ATM (IMA)
Configuring SAToP on Channelized OC3/STM1 (Multi-Rate) Circuit Emulation MIC with
SFP
Inverse Multiplexing for ATM (IMA) Overview on page 184
Understanding ATM IMA Configuration on ACX Series Router on page 174
Configuring ATM IMA on ACX Series on page 181
The Channelized E1/T1 Circuit Emulation MIC (ACX-MIC-16CHE1-T1-CE) is a channelized
MIC with 16 E1/T1 ports. The following features are supported on this MIC:
Each MIC can be separately configured in either T1 or E1 framing mode
Each T1 port supports the following framing modes:
Superframe (D4)
Extended superframe (ESF)
Each E1 port supports the following framing modes:
G704 with CRC4
Platform Supported
MX Series routers
ACX4000 router
Copyright © 2017, Juniper Networks, Inc.
Junos OS Release
12.2R1
12.3X51