Table of Contents
Advertisement
JUNOS Enhanced Services J-series
5.
6.
7.
8.
NOTE: You must manually configure the IP address for the management port you
are using before you save your initial configuration. When you save the configuration
for the first time, the DHCP lease is lost and you will lose the connection to the router
if you have not manually configured the IP address. If you lose connection through
the management interface, you must connect through the console port.
Step 2. Configuring Basic Settings with J-Web Quick Configuration
When you click OK or Apply on J-Web Quick Configuration pages, the configuration
is saved and activated automatically. To configure basic settings with the J-Web
interface:
1.
2.
Table 2: J-Web Set Up Quick Configuration
Field
Host Name (required)
Domain Name
Root Password (required)
Verify Root Password (required)
Time Zone
NTP Servers
Current System Time
DNS Name Servers
Domain Search
Default Gateway
10
Basic Connection and Configuration with the J-Web Interface
Services Router Quick Start
Power on the router by pressing the power button on the front panel.
Wait until the
LED on the front panel turns solid green.
STATUS
Turn on the power to the management device. The router assigns an IP address
to the management device within the
is configured to use DHCP.
From the management device, open a Web browser and enter the IP address
192.168.1.1
in the address field. The Set Up Quick Configuration page appears.
If the Set Up Quick Configuration page is not displayed, select
Configuration>Quick Configuration >Set Up.
Enter information in the boxes on the Set Up Quick Configuration page as shown
in Table 2 on page 10, then click OK or Apply.
Description
Hostname of the router—for example,
Network or subnetwork that the router belongs to.
Root password that user root" can use to log in to the router.
Retyped password.
Time zone in which the router is located.
NTP server to synchronize the system time.
Your current time and date.
DNS server to resolve hostnames into addresses.
Name of each domain to include in a DNS search.
Default route. The IP address of a default router that the Services Router can use
to direct packets addressed to networks not explicitly listed in the routing table.
192.168.1/24
subnetwork if the device
Chicago
.
Advertisement
Table of Contents
