Table of Contents
Advertisement
ZH
4. Install the Wheel Speed Sensor (WSS) and bolt.
Tighten to 22 N·m (16 ft. lbs.).
5. Install the disc brake dust shield and three hex
bolts (1). Tighten to 22 N·m (16 ft. lbs.).
6. Install the front wheel hub. (Refer to 2 - SUSPEN-
SION/FRONT/HUB / BEARING - INSTALLATION).
7. Install the front disc brake rotor (1). (Refer to 5 -
BRAKES/HYDRAULIC/MECHANICAL/ROTORS
INSTALLATION).
-
FRONT SUSPENSION 2 - 21
Advertisement
Chapters
Table of Contents
