Removing Oil Pump; Removing Throttle Link - TOHATSU MD 70-90C2 Service Manual

Removing Rectifier
1. Loosen two rectifier mounting bolts and remove the unit.
Remove ignition coil #3 lower side installation bolt, and then,
grounding wire.
2. Remove terminal.

8) Removing Oil Pump

1. Remove oil pump securing bolts (M6, 2 pcs.), and then,
remove pump together with pump bracket.
• Disconnect oil hose from crank case.
Refer to "Oil System" in Chapter 4.
• Use waste cloth to let it soak with oil if spilt from
hose.

9) Removing Throttle Link

Remove throttle link rod 1 and TPS link rod 2.
1.
• Remove each link rod at the advancer arm
side 3 first.
• When removing each link rod at the ball joint
side, be careful not to apply force to the arm.
TLDI 75/90C2 2010
3
5
1
2
5-25