Adjustment; Steering Friction; Throttle Grip Friction; Trim Tab Adjustment - TOHATSU EverRun MX 25H Owner's Manual

44

ADJUSTMENT

ENOM00073-C

1. Steering friction

ENOW00074-2
Steering may be difficult when steering fric-
tion adjustment bolt is over tightened, it may
also result in loss of control causing an acci-
dent and could lead to severe injury.
ENON00506-1
Note
The steering friction adjustment bolt is
used to adjust the friction load of the
steering. Excessive tightening of the
adjustment bolt may cause damage to the
swivel bracket.
Steering friction can be adjusted in
accordance with your preference by
turning the steering friction adjustment
bolt.
9
3
2
1. Steering friction adjustment bolt
2. Lighter
3. Heavier
WARNING
1
ENOF01816-0
ENOM00074-A

2. Throttle grip friction

ENOW00074-1B
WARNING
Do not overtighten the throttle adjustment
screw or it could result in difficult handling
of the outboard motor, resulting in the loss
of control causing an accident and could
lead to severe injury.
Friction adjustment of the throttle grip
can be made with the throttle adjustment
screw.
2
3
1. Heavier
2. Lighter
3. Throttle friction adjustment screw
ENOM00076-0

3. Trim tab adjustment

ENOW00076-1
WARNING
Be sure that the outboard motor is
secured to transom or service stand, or
accidental drop or fall of outboard motor
could lead to severe personal injury.
Be sure to lock the outboard motor in the
tilt up position, or accidental fall of out-
board motor could lead to severe per-
sonal injury.
Do not go under outboard motor in the tilt
up position and locked, or accidental fall
1
ENOF00445-0