Cleaning And Inspection - TOHATSU MFS 9.9 Owner's Manual

Fuel System

3) Cleaning and Inspection

1. Check carburetor body for crack, damage and dirt. Replace
or clean as necessary.
Use cleaning solution to remove dirt. Blow
passages with compressed air to remove
dirt. Do not use wire to remove dirt.
2. Check jets and nozzle for dirt, and replace if necessary.
3. Check tip of needle valve, and replace if necessary.
4. Check float for crack and damage, and replace if necessary.
5. Check plunger, O rings and gaskets for damage, and
replace if necessary.
4-16
CAUTION
20
9.9/
15
4st 9.9/15/20 2008