Updating The Sensor Firmware; Configuring Snmp - Motorola WS2000 System Reference Manual

7-16 WS2000 Wireless Switch System Reference Guide
5. Optionally, provide the complete path to the sensor firmware file on the server. Enter the path in the
Filepath(optional)
6. Select the bind interface from the
TFTP server for firmware update. Select, as the bind interface, the subnet that is configured as the local
subnet for the VPN tunnel and on which the FTP/TFTP server resides.
7. To restrict the maximum size of the sensor firmware image, use the
value to restrict the file size for the sensor firmware file.

7.10.2 Updating the Sensor Firmware

To update the sensor firmware, use the
server to update the sensor firmware from. A warning dialog appears.
Click Yes to proceed with sensor firmware update.
Once the sensor firmware is updated, a status is shown in the Sensor Firmware Update screen.

7.11 Configuring SNMP

The Simple Network Management Protocol (SNMP) facilitates the exchange of management information
between network devices. SNMP allows an administrator to manage network performance, find and solve
network problems, and plan for network growth. The WS2000 Wireless Switch includes SNMP management
functions for gathering information from its network components, and communicating that information to
specific users. There are four different SNMP screens.
• Use the SNMP Access screen to define SNMP v1/v2c community definitions and SNMP v3 user
definitions associated with access.
• Use the SNMP Trap Configuration screen to configure to define SNMP v1/v2c community definitions and
SNMP v3 user definitions associated with the traps themselves. Trap configuration depends on the
network machine that receives the generated traps.
• Use the SNMP Traps screen to enable system, network, SNMP, mobile unit, and Access Port traps.
• Use the SNMP Rate Traps screen to enable traps by setting RF Rate thresholds.
field.
Bind Interface
FTP, SFTP
drop down list. This interface is used to reach the FTP/
Max size of sensor
or TFTP buttons on the screen. Select the appropriate
file. Use this