Configuring Radius Users - Motorola RFS Series Reference Manual

6-78 Motorola RF Switch System Reference Guide

6.9.5 Configuring Radius Users

Refer to the Users
tab is employed when
tab. The user information is ignored if an LDAP server is used for authentication.
To define the Radius user permissions for switch access:
1. Select Security
2. Select the Users
3. Refer to the following to assess whether an existing user can be used with the local Radius server as is,
requires modification or if a new user is required.
User ID
Guest User
Start Date
Expiry Date
4. Refer to the
If the group assignment is insufficient, use the
their existing group assignments. For guest users, only the password is editable. For normal (non-guest)
users, the password and group association can be modified.
To modify the attributes of an existing user, select the user from the list and click the
Modify the existing user's guest designation, password, expiry date and group assignments as required
to reflect the user's current local Radius authentication requirements.
tab to view the current set of users and groups assigned for the Radius server. The Users
Local is selected as the Auth Data Source within the
> Radius Server from the main menu.
tab.
Displays the username for this specific user. The name assigned should reflect the
user's identity and perhaps their status within the switch managed network (guest
versus secure user).
Displays whether a specific user has been defined as a guest user (with a green
check) or has been configured as permanent user. Guest users have temporary
access.
Defines the time when Guest User's privileges commence.
If the user has been assigned guest privileges, they were also assigned a date
when their Radius privileges expire.
Available Groups field to view the memberships for existing users.
Authentication & Accounting
Edit or Add functions to modify/create users or modify
Edit button.