Radius Client; Radius-Server Acct-Port; Table 35: Radius Client Commands - Motorola EX-3524 Cli Reference Manual

Layer 2 gigabit ethernet poe/poe+ switch
Hide thumbs Also See for EX-3524:
Table of Contents

Advertisement

Chapter 7
| Authentication Commands

RADIUS Client

RADIUS Client
radius-server
acct-port
Example
Console(config)#authentication login radius
Console(config)#
Related Commands
username
- for setting the local user names and passwords (167)
Remote Authentication Dial-in User Service (RADIUS) is a logon authentication
protocol that uses software running on a central server to control access to RADIUS-
aware devices on the network. An authentication server contains a database of
multiple user name/password pairs with associated privilege levels for each user or
group that require management access to a switch.

Table 35: RADIUS Client Commands

Command

radius-server acct-port

radius-server auth-port
radius-server host
radius-server key
radius-server retransmit
radius-server timeout
show radius-server
This command sets the RADIUS server network port for accounting messages. Use
the no form to restore the default.
Syntax
radius-server acct-port port-number
no radius-server acct-port
port-number - RADIUS server UDP port used for accounting messages.
(Range: 1-65535)
Default Setting
1813
Command Mode
Global Configuration
Function
Sets the RADIUS server network port
Sets the RADIUS server network port
Specifies the RADIUS server
Sets the RADIUS encryption key
Sets the number of retries
Sets the interval between sending authentication requests GC
Shows the current RADIUS settings
– 170 –
Mode
GC
GC
GC
GC
GC
PE

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ex-3548

Table of Contents