Wlan-Acl - Motorola WS5100 Series Cli Reference Manual

2-70 WS5100 Series Switch CLI Reference Guide
WS5100(config)#show wireless wlan config 1
WLAN: 1, status: enabled, description: WLAN1, ssid: sardarjee
auth: none, encr: none, inactivity-timeout: 1800 seconds
vlan 1: unlimited users
mu-mu-disallow: disabled, secure-beacon: disabled, answer-bcast-
ess: enabled,
weight: 1, prioritize-voice: disabled, spectralink-voice-protocol:
disabled
multicast mask1: 00-00-00-00-00-00, mask2: 00-00-00-00-00-00
traffic-classification : normal, wmm-mapping: 8021p, L3-mobility:
disabled
Client Bridge Backhaul is disabled on this WLAN
NAC Mode: bypass-nac-except-include-list
Exclude list(s): NotMe
WS5100(config)#

2.2.33 wlan-acl

Common to all modes
Syntax
show wlan-acl [<1-32>|all]
Parameters
<1-32>
all
Example
WS5100>show wlan-acl 20
WLAN port: 20
Inbound IP Access List
Inbound MAC Access List
Outbound IP Access List
Outbound MAC Access List :
WS5100>
WS5100>show wlan-acl all
WLAN port: 1
Inbound IP Access List
Inbound MAC Access List
Outbound IP Access List
Outbound MAC Access List :200
WS5100>
Displays ACLs attached to the specified WLAN ID
Displays all ACLs attached to a WLAN port
:
:
:
:78
:200
:78