Associating An Acl With Wlan - Motorola RFS Series Reference Manual

6-18 Motorola RF Switch System Reference Guide
7. Refer to the
messages if something goes wrong in the transaction between the applet and the switch.
8. Click OK to use the changes to the running configuration and close the dialog.
9. Click Cancel

6.4.3 Associating an ACL with WLAN

Use the Membership
requiring membership permission restrictions.
To associate a filter ACL index with a WLAN:
1. Select Security> Wireless Filters
2. Select one or more of the existing ACLs from the filters list.
3. Click the Memberships
4. Select the box to the right of each WLAN you want associated with the ACL.
Selecting a WLAN maps it the MAC address range and allow or deny designation assigned to it.
Consequently, be sure you are not restricting MU traffic for a WLAN that requires those MAC addresses
to interact with the switch.
5. Refer to the
messages if something goes wrong in the transaction between the applet and the switch.
6. Click OK to use the changes to the running configuration and close the dialog.
7. Click Cancel
Status field for the current state of the requests made from applet. This field displays error
to close the dialog without committing updates to the running configuration.
screen to define a name for the ACL index and map the index to WLANs (1-32)
from the main menu tree.
button.
Status field for the state of the requests made from applet. This field displays error
to close the dialog without committing updates to the running configuration.