Associating An Acl With Wlan - Motorola RFS7000 Series System Reference Manual

Define an Index (numerical identifier) for the ACL and the starting and ending MAC address range for
devices allowed/denied access to the switch managed network.
3. Enter an Index numerical value (1 -1000) in the
The MU-ACL Index is a numerical identifier used to associate a particular ACL to a range of MAC
addresses (or a single MAC address) either allowed or denied access to the switch managed network.
Enter a new Index to define a new MAC Address range and allow/deny ACL Index designation.
4. Enter the a hex value for the
This is the beginning MAC address either allowed or denied access to the switch managed network.
5. Enter the a hex value for the
Ending MAC field to use only the
switch managed network.
6. Use the drop-down menu to select
This rule applies to the MUs within the specified Starting and Ending MAC Address range. For
example, if the adoption rule is to Allow, access is granted for all MUs within the specified range.
7. Refer to the Status
error messages if something goes wrong in the transaction between the applet and the switch.
8. Click OK to use the changes to the running configuration and close the dialog.
9. Click Cancel to close the dialog without committing updates to the running configuration.

6.4.3 Associating an ACL with WLAN

Use the Membership screen to define a name for the ACL index and map the index to WLANs (1-32) requiring
membership permission restrictions.
To associate a filter ACL index with a WLAN:
1. Select Security >
2. Select one or more existing ACLs from the filters list.
3. Click the Memberships
Starting MAC address.
Ending MAC address. Enter the same Starting MAC address within the
Starting MAC
Allow or Deny.
field for the current state of the requests made from applet. This field displays
Wireless Filters from the main menu tree.
button.
MU-ACL Index field.
address as either allowed or denied access to the
6-17
Switch Security