Attaching An Acl On A Wlan Interface/Port - Motorola WS5100 Series Migration Giude
Hide thumbs
Also See for WS5100 Series:
- Cli reference manual (492 pages) ,
- Reference manual (444 pages) ,
- Troubleshooting manual (100 pages)
Table of Contents
Advertisement
10-16 WS5100 Series Switch Migration Guide
4. Click on the
a. Use the
options include – Ethernet 1, Ethernet 2, VLAN 1 and VLAN 1.
NOTE: MAC ACLS cannot be applied on Router ACLs.
b. Use the
3 interface.
c. Use the
interface.
d. Click on
10.5.3 Attaching an ACL on a WLAN Interface/Port
Use the Attach- WLAN tab to view and assign an ACL to a WLAN on the switch. By default, arp is not
supported. Create a MAC ACL to allow arp on the switch.
NOTE: WLAN based ACLs allows users to enforce rules/ACLs on both the inbound and
outbound direction, as opposed to L2 ACLs, which just support the inbound direction.
To configure a WLAN ACL:
1. Select
Security > ACLs
Attach
tab in the ACLs window and click on the
Interface
drop-down menu to select the interface to configure on the switch. Available
IP ACL
drop-down menu to select an IP ACL used as the inbound IP for the layer 2 or layer
MAC ACL
drop-down menu to select an MAC ACL used as the MAC IP for the layer 2
OK
button to save the changes and close the dialog box.
from the main menu tree.
Add
button to attach the ACL to an interface.
Advertisement
Table of Contents
