Attaching An Acl Layer 2/Layer 3 Configuration - Motorola RFS Series Reference Manual
Wireless lan switches wing system
Hide thumbs
Also See for RFS Series:
- Reference manual (948 pages) ,
- System reference manual (590 pages) ,
- Reference manual (1054 pages)
Table of Contents
Advertisement
12.Click
OK
to use the changes to the running configuration and close the dialog.
13.Click
Cancel
to close the dialog without committing updates to the running configuration.
6.5.3 Attaching an ACL Layer 2/Layer 3 Configuration
Use the
Attach-L2/L3
To attach an interface:
1. Select
Security
2. Click the
Attach-L2/L3
3. Refer to the following information as displayed within the Attach tab:
Interface
IP ACL
MAC ACL
4. Select an interface and click on
5. Select an interface and click the
6. Click on
Add
button to add an physical or VLAN interface to the switch. For more information, see
a New ACL Layer 2/Layer 3 Configuration on page
screen to view and assign the ACL to a physical interface or VLAN.
>
Firewalls
from the main menu tree.
tab.
The interface to which the switch is configured. It can be one of the following:
• eth1
• eth2
• vlan1 (or any additional VLANs that have been created)
• tunnel n (where n equals the name(s) of those tunnels created thus far).
Displays the IP ACL configured as the inbound IP for the layer 2 or layer 3 interface.
Displays the MAC ACL to be configured as the MAC IP for the layer 2 interface.
Edit
to modify the ACL interface, IP ACL and MAC ACL values.
Delete
button to delete the interface configuration from the switch.
6-28.
6-27
Switch Security
Adding
Advertisement
Table of Contents
