Attaching An Acl Layer 2/Layer 3 Configuration - Motorola RFS Series System Reference Manual

6-20 Motorola RF Switch System Reference Guide
6.4.2.1 Adding or Editing a New ACL WLAN Configuration
After creating an ACL, it can be applied to one or more WLANs on the switch. To attach an ACL to a WLAN:
1. Select Security
2. Click the Security Policy
3. Click the Attach-WLAN
4. Click the Add
the Edit button.
5. Define a WLAN Index
6. Use the IP ACL
7. Use the MAC ACL
8. Select either the
9. Refer to the
messages if something goes wrong in the transaction between the applet and the switch.
10.Click OK to use the changes to the running configuration and close the dialog.
11.Click Cancel

6.4.3 Attaching an ACL Layer 2/Layer 3 Configuration

Use the Attach-L2/L3
To attach an interface:
1. Select Security
2. Click the Security Policy
> Wireless Firewall
tab.
tab.
button to create a new ACL WLAN association or highlight an existing association and click
between 1 and 32.
drop-down menu to select an IP ACL for the WLAN.
drop-down menu to select the MAC ACL for the WLAN interface.
Inbound or Outbound
Status field for the state of the requests made from applet. This field displays error
to close the dialog without committing updates to the running configuration.
screen to view and assign the ACL to a physical interface or VLAN.
> Wireless Firewall
tab.
from the main menu tree.
radio button to define which direction the ACL applies.
from the main menu tree.