Replacing The Ct Unit - Canon NP-1015 Service Manual

Table of Contents

Advertisement

F. REPLACING
THE CT UNIT
1) Open the front door.
2) Swing the developing unit release lever
counterclockwise.
3) Pull the developing
unit forward.
4) Grasp the handle of the developing unit,
and gently raise it.
Figure l-6
6) Place the CT unit gently on the develop-
ing unit guide rails and push it into the
copier.
7) Swing the developing unit release lever
clockwise.
8) Close the front door.
Note:
1. ,Do not tilt or handle the developing
unit
or the CT unit roughly.
2. Do not place the developing
unit or the
CT unit on the floor. Be sure to place
them
in their
storage
box or in the
pedestal of the copier.
V.
WARNING
INDICATOR
AND
RE-
QUIRED
ACTION
A. JAM
INDICATOR
!3+
If an area of this indicator flashes while
copying is taking place, it is likely that the
paper has jammed
at the position repre-
sented by the part that is flashing. Check
and take action as follows.
b
DF
unit
document
indicator
wt-
Copier
psper
JAM
indicator
I
L
Manual
feed
TRAY
OPEN
indicator
L
Sorter
JAM
indicator
When clearing a paper jam which ahs
occurred
in an option unit (sorter or DF),
refer to the Service Manual for the option
unit.
1. DF unit document JAM indicator
2. Copier paper JAM indicator
3. Manual feed TRAY OPEN indicator
4. Sorter JAM indicator
If paper jams inside the copier, check
the paper pick-up area; separation
feeder
area, fixing/copy
delivery
area, and car-
tridge area, and remove all jammed paper.
1) Open the front door.
2) Remove the copies from the copy tray.
3) Operate the release and open the copy
delivery unit.
4) Check if there is copy paper jammed in
the fixing unit. If there is paper jammed
in it, turn the knob of the fixing rollers
clockwise to remove the jammed paper.
Figure l-7
5) Close the copy delivery unit.
6) Check if there is paper jammed
in the
separation/feeder
area.
If there
is,
swing the feeder release lever counter-
clockwise
to open
the feeder,
then
remove the jammed
paper. Be careful
not to tear it.
COPVGlGHT
'0
1988 CANON INC.
CANON NP4015/1215S
AN.0
OCT. 1988 PRINTEG
IN JAPAN (IMPAIMf
AU JAPONI
l-9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Np-1215s

Table of Contents