Light Control - Ducati DIAVEL V4 2024 Owner's Manual

Light control

Low / High beam
By means of button (1) it is possible to switch from
low beam to high beam and vice versa:
position (A) for high beam
●
position (B) for low beam
●
For high-beam flasher, press the button (1) in
position (C).
If engine is not started after turning the key to on, it
is nevertheless possible to switch on the lights or
flash.
If within 60 seconds from the manual switching on of
the low or high beam the engine is not started, the
lights are turned off.
To preserve the motorcycle battery, the headlight is
automatically switched off when starting the engine
and it is then switched on again when the engine has
started.
DRL in "Auto" mode – only for version with
DRL
If DRL have been set in "Auto" mode (see page 199),
the instrument panel automatically manages the
DRL based on the detected ambient light:
A
B C
1
if the instrument panel detects good light
●
conditions (day) the DRL are turned on and the
low beam is turned off;
if the instrument panel detects poor light
●
conditions (night) the DRL are turned off and
the low beam is turned on.
When the DRL are set to "Auto" mode, the
corresponding warning light (7,Fig 98) will turn on.
By pressing button (2, Fig 43) DRL are turned off; by
pressing again button (2, Fig 43) DRL turn on with
control strategy set to "Manual".
1 2
C
Fig 43
69