LAP Activation/Deactivation function (lap
E
time)
This function activates and deactivates the LAP function (lap
time).
To display the function, enter the "setting" menu page 46
and access the "LAP" page.
In the next display, press the reset button (14. fig. 4) showing
"ON / OFF".
The information will be displayed as follows:
- the arrows indicate the setting currently in use;
- use buttons (1, fig. 7) "▲" and (2, fig. 7) "▼" to select
the new setting;
- to store the new setting press the reset button (14, fig.
4); the arrows will move to the new stored condition.
To exit, select "EXIT" and press the reset button (14, fig. 4).
Storing the "OFF" condition disables the LAP function;
Storing the "ON" condition enables the LAP function (see
LAP registration operation).
Note
When the "LAP" function is active, the flash button
(13. fig. 4) takes on the dual function of high beam headlight
"flash" and lap time Start / Stop.
72