Table of Contents
Advertisement
Lap time function (LAP): LAP activation/
deactivation function
This function activates and deactivates the LAP
function (lap time).
To display the function, enter the "setting" menu and
access the "LAP" page.
The information will be displayed as follows:
-
the tick (V) indicates that the setting is currently
enabled;
-
use buttons (1) and (2) to highlight the new
setting;
-
to store the new setting, press button (4); the tick
(V) will move on the stored condition.
To quit this page, select the "EXIT" wording, and press
button (4). Storing the "OFF" condition disables the
LAP function.
Storing the "ON" condition enables the LAP function.
Note
When the LAP function is enabled, button (3)
can be used both as high beam Flash and lap time
Start/Stop.
94
Advertisement
Table of Contents
