Lap Activation/Deactivation Function (Lap Time) - Ducati Diavel Carbon ABS Owner's Manual

LAP Activation/Deactivation function (lap
E
time)
This function activates and deactivates the LAP function (lap
time).
To access the function it is necessary to view the "setting"
menu page 48, using button (1, fig. 14) "▲" or (2, fig. 14)
"▼" select the "LAP" function and press the reset button
(12, fig. 12) to go to next page.
Function state is highlighted on the display (ON in green or
OFF in yellow); Use button (1, fig. 14) "▲" or (2, fig. 14) "▼"
to shift the arrow on the left onto the new setting and
confirm by pressing the reset button (12, fig. 12).
To exit the setting function, press the reset button (12, fig.
12) where "EXIT" is highlighted.
Storing the "OFF" condition disables the LAP function.
Storing the "ON" condition enables the LAP function (see
"LAP registration" paragraph).
Note
When the "LAP" function is active, the flash button
(11, fig. 12) takes on the dual function of high beam headlight
"flash" and lap time Start / Stop.
68