LAP Activation/Deactivation function (lap
time)
This function activates and deactivates the LAP
function (lap time).
To display the function, enter the "setting" menu
page 87 and access the "LAP" page.
-
the arrows indicate the setting currently in use;
-
use buttons (1) and (2) to select the new setting;
-
To store the new setting it is necessary to press
the reset button (4);
-
the arrows will move to the new stored
condition.
To exit, select "EXIT" and press the reset button (4).
Storing the "OFF" condition disables the LAP
function.
Storing the "ON" condition enables the LAP function
(see LAP registration operation page 122).
Note
When the "LAP" function is active, the flash
button (3) takes on the dual function of high beam
headlight "flash" and lap time Start/Stop.
120