LAP Activation/Deactivation function (lap
time)
This function allows enabling/disabling LAP (lap time)
function.
To gain access to this function display the "setting"
menu page 86, use buttons (1) or (2) to select the
"LAP" function and press the reset button (4) to shift
to next page.
Function status is highlighted on the display (green if
ON or yellow if OFF); use buttons (1) or (2) to move
the left arrow on the new setting, and press the reset
button (4) to confirm.
To quit the setting function, press the reset button (4)
with "EXIT" highlighted.
If "OFF" is saved, LAP function will be disabled. If "ON"
is saved, LAP function will be enabled (see "LAP
Recording" paragraph page 109).
Note
When "LAP" function is active, flash button (3)
takes on the dual function of high beam "FLASH" and
LAP timer Start / Stop.
107