Table of Contents
Advertisement
ENGINE setting function (Engine Power
Control)
This function customises engine power and output.
To display the function, enter the "setting" menu
page 101 and access the "SET UP" page.
Use buttons (1) and (2) to select the riding mode to
be changed and press the reset button (4) to access
the "ENGINE" function.
When accessing the function, the Engine setting
appears at the top of the round display:
-
150 HIGH, 150 LOW, or 100 HP (for EU, UK, USA
versions);
-
HIGH, MID, or LOW (for France and Japan
versions).
To change the engine "power", use buttons (1) and (2)
to select the "NEW SET" indication and press the
reset button (4).
Use buttons (1) and (2) to select one of the three
options (150 HIGH, 150 LOW or 100 HP) or (HIGH,
MID e LOW) for France and Japan versions; press the
reset button (4) to confirm the new level.
At this point, store the new setting by pressing the
reset button (4) for 3 seconds with "MEMORY"
displayed.
118
The upper indication will be updated to confirm that
the new setting was "received" and stored. To exit
the function, select "EXIT" and press the reset
button (4).
Advertisement
Table of Contents
