Engine Setting Function (Engine Power Control) - Ducati Diavel Owner's Manual

ENGINE setting function (Engine Power
E
Control)
This function customises engine power and output.
To access the function it is necessary to view the "setting"
menu page 48, using button (1, fig. 14) "▲" or (2, fig. 14)
"▼" select the "RIDING MODE" function and press the
reset button (12, fig. 12) to go to next page.
Use button (1, fig. 14) "▲" or (2, fig. 14) "▼" to select the
riding mode to be changed and press the reset button (12,
fig. 12) to access the next page. Now use button (1, fig. 14)
"▲" and (2, fig. 14) "▼" to select the "ENGINE" indication
and press the reset button again (12, fig. 12) to confirm
selection.
When accessing the function, the engine setting (ENGINE
162 HIGH, 162 LOW o 100 HP) appears at the right-hand side
of the display, inside a rectangle.
Note
In Japan and France versions, the display displays the
settings (ENGINE HIGH, MIDDLE or LOW).
Using button (1, fig. 14) "▲" or (2, fig. 14) "▼" select one of
the three available engine settings; after selecting the new
setting, press the reset button (12, fig. 12) to highlight
"MEMORY" indication.
At this point, store the new setting by pressing and holding
the reset button (12, fig. 12) for 3 seconds with "MEMORY"
displayed. If the setting has been stored successfully, the
display will show "MEMORIZED" in green for 2 seconds and
the EXIT option will be highlighted automatically.
56
To exit the setting function, press the reset button (12, fig.
12) where "EXIT" is highlighted.