Table of Contents
Advertisement
ENGINE setting function (Engine Power
E
Control)
This function customises engine power and output.
To display the function, enter the "Setting" menu page 50
and access the "SET UP" page. Use buttons (1, fig. 8) "▲"
and (2, fig. 8) "▼" to select the riding style to be changed and
press the reset button (14, fig. 5) to access the "ENGINE"
function.
When accessing the function, the engine setting (150 HIGH,
150 LOW or 100 HP) appears at the top of the circular display
(B, fig. 7).
To change the engine "power", use buttons (1, fig. 8) "▲"
and (2, fig. 8) "▼" to select the "NEW SET" indication and
press the reset button (14, fig. 5).
Use the buttons (1, fig. 8) "▲" and (2, fig. 8) "▼" to select
one of the 3 selections (150 HIGH, 150 LOW or 100 HP);
press the reset button (14, fig. 5) to confirm the new level.
At this point, store the new setting by pressing the reset
button (14, fig. 5) for 3 seconds with "MEMORY" displayed.
The upper indication will be updated to confirm that the new
setting was "received" and stored.
To exit the function, select "EXIT" and press the reset button
(14, fig. 5).
62
Advertisement
Table of Contents
