Engine Setting Function (Engine Power Control) - Ducati Diavel Carbon Owner's Manual

ENGINE setting function (Engine Power
Control)
This function customises engine power and output.
To access the function it is necessary to view the
"setting" menu page 62, using button (1, fig. 14)
"▲" or (2, fig. 14) "▼" select the "RIDING MODE"
function and press the reset button (12, fig. 12) to go
to next page.
Use button (1, fig. 14) "▲" or (2, fig. 14) "▼" to
select the riding mode to be changed and press the
reset button (12, fig. 12) to access the next page.
Now use button (1, fig. 14) "▲" and (2, fig. 14) "▼"
to select the "ENGINE" indication and press the
reset button again (12, fig. 12) to confirm selection.
When accessing the function, the engine setting
(ENGINE 162 HIGH, 162 LOW or 100 HP) appears at
the right-hand side of the display, inside a rectangle.
Note
In Japan and France versions, the display
displays the settings (ENGINE HIGH, MIDDLE or
LOW).
Using button (1, fig. 14) "▲" or (2, fig. 14) "▼" select
one of the three available engine settings; after
selecting the new setting, press the reset button (12,
fig. 12) to highlight "MEMORY" indication.
72
At this point, store the new setting by pressing and
holding the reset button (12, fig. 12) for 3 seconds
with "MEMORY" displayed. If the setting has been
stored successfully, the display will show
"MEMORIZED" in green for 2 seconds and the EXIT
option will be highlighted automatically.
To exit the setting function, press the reset button
(12, fig. 12) when "EXIT" is highlighted.