Dtc (Ducati Traction Control) Setting Function - Ducati SPECIAL EDITION SUPERBIKE 848 EVO CORSE Owner's Manual

DTC (Ducati Traction Control) setting
function
This function serves to set the sensitivity level for the
DTC (Ducati Traction Control).
To set the Traction Control sensitivity level, with the
motorcycle stationary, enter the "Setup DTC" menu
page. This page only appears in the menu once the
Traction Control ECU has been activated (DTC ON).
The Traction Control sensitivity level setting
(L.1.......L.8) is indicated on the right-hand side of the
display. The sensitivity levels range from "1" to "8";
the higher the number, the greater the intervention of
the Traction Control system (see following
paragraph).
Within this menu page, press switch (12, fig. 6) in
position B "▼" for 3 seconds to access the level
setting function.
page 1: the display will show "Setup LEV. 1".
If you wish to set this level, press switch (12, fig. 6)
in position B "▼" for 3 seconds; the instrument panel
will automatically quit this page and return to the
initial display, with the level setting indicated on the
right.
If instead you wish to set the next highest level,
press switch (12, fig. 6) in position B "▼".
Only if
active
B = ON for 3
secs.
A
B
B
B
B = ON
for 3 sec.
A
B = ON
for 3 sec.
A
B = ON
for 3 sec.
fig. 27
45