NEC Univerge SV8100 Features And Specifications Manual page 1836

Issue 7.0
For this feature...
1
Except where indicated, dial Service Code from intercom dial tone (e.g., press idle Speaker first).
Programmable
Function Keys
Save Number
Dialed
Selectable Display
Messaging
Selectable Ring
Tones
System
Programming
Password
Protection
Station Message
Detail Recording
Tandem Trunking
(Unsupervised
Conference)
Time and Date
Clock/Calendar
Display
3 - 22
Table 3-3 Service Codes by Feature (Continued)
Dial this Service Code...
751 + key + code
752 + key + code
715
785
4 + 3 + message (01~20),

or
4 + 3 + Hang up to cancel

711 + 1 (ICM) or 2 (Trk) +
tone (1~8)
720 + 1 (ICM) + 2 (Trk) +
tone (1~8)
# #
 
621
622
623
#8
728 + hour + minutes
1
When you ...
Change the function of a
programmable key using 751 service
code.
Change the function of a
programmable key using 752 service
codes.
Save a number (from SLT) or dial a
saved number.
Clear the number saved by Save
Number Redial number.
Activate or Cancel Selectable
Display Messaging.
Listen to the incoming ring choices.
Change your extension incoming ring
tones.
Enter system programming mode.
Print the SMDR Extension
Accumulated printout.
Print the SMDR Group Accumulated
printout.
Print the SMDR Account Code
Accumulated printout.
Set up an Unsupervised Conference.
Set the system Time.
UNIVERGE SV8100
Also see
Function
Key...
-
-
30
-
17
-
-
-
-
-
-
-
-
Codes Tables