NEC Univerge SV8100 Features And Specifications Manual page 1831

UNIVERGE SV8100
For this feature...
1
Except where indicated, dial Service Code from intercom dial tone (e.g., press idle Speaker first).
Central Office Calls,
Answering /
Hold
Central Office Calls,
Placing
Class of Service
Conference
Data
Communications
Department Calling
Department Step
Calling
Dial Pad
Confirmation Tone
Directed Call
Pickup
Features and Specifications Manual
Table 3-3 Service Codes by Feature (Continued)
Dial this Service Code...
#0
672 + Line number
(001~200)
679 + 1 (set) or
0 (cancel)
#9 + 001~200
645 + trunk # + 1 (block)
145 + trunk # + 0 (enable)
704 + trunk group (1~9 or
001~200)
677
Hookflash + #1 + extension
+ hookflash twice
783
784
650 + 0 (install) or
1 (remove)
#
724
+ ext.

1
When you ...
Use Universal Answer to pick up a
call ringing over the paging system.
Answer a call on a specific trunk.
Change the ability for a second call
with DID/DISA/DIL.
Place a call over a specific trunk.
Block/busy out outbound usage on a
trunk with Trunk Port Disable.
Place an outside call over a trunk
group.
Change the COS of another
extension. Must be allowed in
Program 20-13-28.
Activate Conference from a Single
Line (500/2500) Telephone.
Enable the data connection
auto-answer mode.
Disconnect an active data call.
Log in (0) or log out (1) for your
Department Calling Group.
Step Call through a Department
Group.
Enable/disable Dial Pad
Confirmation Tone.
Pick up a call ringing or waiting at an
extension.
Issue 7.0
Also see
Function
Key...
-
-
-
01 + trunk

(100-200)
-
02 + group

-
1016
-
-
46
36
-
-
3 - 17