Activating Online Operation: Starter Via Profinet Io - Siemens SINAMICS G130 Operating Instructions Manual

Operation
6.8 Communication via PROFINET IO
6.8.2

Activating online operation: STARTER via PROFINET IO

Description
Online operation with PROFINET IO is implemented using TCP/IP.
Prerequisites
● STARTER Version 4.2 or higher
● Control unit CU320-2 PN or CBE20
STARTER via PROFINET IO (example)
Figure 6-27
Procedure, establishing online operation with PROFINET
1. Set the IP address in Windows XP
The PC/PG is referred here to a fixed, free IP address.
2. Settings in STARTER
3. Assigning the IP address and the name
The PROFINET interface must be "baptized" so that the STARTER can establish
communication.
4. Select online operation in STARTER.
252
STARTER via PROFINET (example)
Inverter chassis units
Operating Instructions, 07/2016, A5E00331449A