Activating Licensed Functions; Licensing - Siemens sinamics G120 Operating Instructions Manual
Low voltage inverters chassis devices with cu250s-2 control units and encoder evaluation
Hide thumbs
Also See for sinamics G120:
- List manual (1256 pages) ,
- Manual (732 pages) ,
- Operating instructions manual (550 pages)
Table of Contents
Advertisement
Appendix
A.2 Activating licensed functions
A.2
Activating licensed functions
A.2.1
Licensing
How do I activate a licensed function?
Procedure, case 1: Recommended
To activate a licensed function, proceed as follows:
1. Order a memory card - with or without firmware - with the license that you require as Z
option.
2. Insert the card in the switched off inverter.
3. Switch the inverter on.
You have activated the licensed function.
Precondition case 2
You have a memory card without a license.
Procedure, case 2
To activate a licensed function, proceed as follows:
1. Order the license for the function that you require.
2. You receive the "Certificate of License", it contains:
– the software order number
– the license number
– the delivery note number
3. Create the license key using the "WEB License Manager".
4. Insert the card into the inverter.
5. Write the license key to the card using STARTER or BOP-2.
6. Switch off the inverter power supply.
7. Switch on the inverter power supply again.
You have activated the licensed function.
478
Overview of Control Units (Page 29)
License key (Page 479)
Writing the license key to the card (Page 482)
Operating Instructions, 01/2016, FW V4.7 SP6, A5E31759476B AE
Converter with CU250S-2 Control Unit
Advertisement
Table of Contents
