Description; Identifying The Converter - Siemens SINAMICS G120 Original Instructions Manual

Description

Important data on the Power Modules is provided in this section. Further information is
contained in the hardware installation manuals listed in Section Manuals for your inverter
(Page 446).
All power data refers to rated values or to power for operation with low overload (LO).
3.1

Identifying the converter

Main components of the inverter
Each SINAMICS G120 inverter comprises a
Control Unit and a Power Module.
• The Control Unit controls and monitors the
• The Power Modules are available for motors
The following data is provided on the Power Module type plate (
● Designation:
● Technical data:
● Order number:
● Version:
The following data can be found on the Control Unit type plate (
● Designation:
● Order number:
● Version:
Inverter with CU230P-2 Control Units
Operating Instructions, 11/2013, FW V4.6.6, A5E02430659B AG
Power Module and the connected motor.
with a power range of between 0.37 kW and
250 kW.
e.g. Power Module 240
Voltage and current
e.g. 6SL3224-0BE13-7UA0
e.g. A02
e.g. Control Unit CU240E-2 DP-F
e.g. 6SL3244-0BB13-1PA0
e.g. A02 (hardware)
①
):
②
):
3
25