Drive Objects - Siemens SINAMICS G130 Operating Instructions Manual

Converter built-in units 75 kw-800 kw
Hide thumbs Also See for SINAMICS G130:
Table of Contents

Advertisement

Operation
6.3 Basic information about the drive system
6.3.2

Drive objects

A drive object is a self-contained software function with its own parameters and, if
necessary, its own faults and alarms. Drive objects can be provided as standard (e.g. I/O
evaluation), or you can add single (e.g. option board) or multiple objects (e.g. drive control).
Figure 6-3
Standard drive objects
● Drive control
Drive control handles closed-loop control of the motor. 1 Power Module and at least 1
motor and up to 3 encoders are assigned to the drive control.
● Control Unit, inputs/outputs
The inputs/outputs on the Control Unit are evaluated within a drive object.
Optionally installed drive objects
● Option board evaluation
A further drive object handles evaluation of an installed option board. The specific method
of operation depends on the type of option board installed.
● Terminal Module evaluation
A separate drive object handles evaluation of the respective optional Terminal Modules.
190
Drive objects
Inverter chassis units
Operating Instructions, 07/2016, A5E00331449A

Advertisement

Table of Contents
loading

Table of Contents